- High security key allows for easy access with only a half-turn to unlock - Premium chrome plating for maximum rust protection - 7.5 ft. long 10mm security cable with hitch pin adapter
Swagman's 2-Bike RV Bumper Rack is made of heavy-duty steel and designed to carry two bicycles of any size and type (up to 30 pounds each) by their wheels, which fit in the rack's trays. This quality rack bolts on the bumper of RVs with a 4- to 4.5-inch continuous welded steel bumper. Installation hardware is included.
The Swagman LOCKING THREADED HITCH PIN is specifically designed to prevent theft and wobble for Swagman's rack with threaded 2" receiver bar. - High-security key allows for easy access with only a half-turn to unlock - Premium chrome-plated for maximum rust protection - Unique hidden pin cylinder for added security - Fits 2" only equipped racks - Threaded
Mount your bike nearly anywhere with Swagman's Claw. This 9mm fork mount bolts to truck beds, SUVs, or anything you can think of. And, the burly quick-release keeps your fork securely locked down.
The Swagman eBike/Cruiser Bar Adapter creates a higher top tube for your bike by attaching below the stem and seat post of your bikes. This will allow the ratcheting arms of your bike to hold step-through and heavier-weight bikes securely by grabbing onto the adapter. - Fits: Cruiser, eBikes and Step Through bikes requiring a higher top tube for use on Platform Hitch Mount Racks. - Max Load: 35 lbs. per bike when used on a Hanging Rack - Telescopic bar fits multiple bike sizes - Adapter comes equipped with vinyl-coated hangers - User friendly quick release - 25"-31" Maximum Width
The Current is our heavy-duty rack which allows for use on either 1-1/4" or 2" hitch receiver. It also has a higher weight capacity per bike at 60lbs, making it e-bike approved and also accommodating Fat Tire bikes with tire widths up to 5"! The Current comes with locking ratchet hooks and a locking hitch pin to keep your bikes and rack secured to your vehicle. It has the ability to tilt away from your vehicle with bikes mounted for rear vehicle access, and it folds up when not in use. This rack is everything you need all in one! - Carries: 1-2 bikes - 1-1/4" or 2" hitch receiver - Weight capacity: 60lbs per bike - Fat Tire bike-compatible up to 5" wide - Tilts and folds away from vehicle while bikes are loaded - Includes locking threaded hitch pin - Rack weight: 59lbs
The Swagman | E-Spec can be used on a 2" hitch receiver and is capable of carrying two bikes with a weight capacity of 70lbs. per bike anywhere! The E-SPEC comes with locking ratchet hooks and locking hitch pin to keep your prized possessions safe. - Fits Class 3 2" Hitch Receivers - Fits 20" to 29" wheels - Fits tires up to 3" wide - Carries up to 2 eBikes with a maximum weight capacity of 70lbs per bike - Adjustable Locking Ratchet Hooks - Fits most frame sizes, shapes and styles - Step Through/Cruiser Style bikes require the use of a Bar Adapter - When being used on a car, truck or SUV it can be folded up - When being used on an RV or Motorhome, the provided RV Bolt is required - Locking Threaded Hitch Pin - Rack Weight: 63lbs
Swagman's Pick Up rack makes it easy to load bikes in your truck and go. This quality rack features a telescoping bar that easily adjusts to span your pickup bed. The bikes are held by two fork mounts. The Pick Up features a lock to secure the rack to your truck bed.
The Swagman | Quad 2+2 rack provides the versatility to transport 2 bikes or attach the add-on to travel with 4 bikes of up to 45 pounds each. Simple to assemble and easy to use, the padded foam hooks utilize quick-release triggers, ratchet down on the frame, and lock in place for security. - Fits Class 3 2" Hitch Receivers - Fits 20" to 29" wheels - Fits tires up to 3" wide - Carries up to 4 Bikes with a maximum weight capacity of 45lbs per bike - Transforms from 2 bike to 4 bike carrier - Adjustable Locking Ratchet Hooks - Fits most frame sizes, shapes and styles - Step Through/Cruiser Style bikes require the use of a Bar Adapter - Can be folded up when not in use - Locking Threaded Hitch Pin - Rack Weight: 63lbs
Adapt your Swagman bike rack to accommodate fat bikes with wheel trays specifically made for extra-wide tires. - Fat Bike Wheel Holder (set includes 1 inner, 1 outer wheel tray) - For use with Swagman's Quad 2+2 or Chinook bike racks
Swagman's Roamer LT is the perfect rack to bolt to your pop-up trailer so you can take your bicycles along on vacation (bike mounts sold separately). This quality rack fits onto tent trailers, truck canopies and tonneau covers and carries up to two bikes with a maximum load of up to 150 pounds. This versatile load bar kit measures 110-inches wide and comes with all the hardware needed for installation.
Swagman's Trailhead 4 rack is an easy-to-use, sturdy double-arm hitch rack featuring quality steel construction for durability and long life. Swagman's protective anti-sway cradles quickly and easily adjust to safely hold up to four bicycles and prevent bike-to-bike contact. The arms easily fold down when not in use, and the rack tilts forward so you can access the rear of your vehicle.
Transport your bike with ease, thanks to Swagman's Upright Roof Rack. It's simple design grabs onto the downtube of your bike and secures both wheels in place with straps. There's no removing the front wheel, so it's incredibly easy and versatile. The tray fits on round, square, and factory crossbars that are 3-inches wide or less.
Adapt your Swagman bike rack to accommodate fat bikes with wheel holders that fit extra-wide tires. - For use with Swagman's XTC 2 & XTC 4 bike racks - XTC 2 & XTC 4 Fat Bike Wheel Holder (set) 1 left, 1 right wheel holder
Sunlite's versatile Bike Block Quick Release Fork Mount is a handy bike mount that you can install in your vehicle, pickup truck bed or on virtually any flat surface. It features a sturdy 9mm-diameter quick release to securely support your 2-wheeler by its fork. And, the Bike Block is made of heavy-duty metal for strength and reliability. Plus, it features a pass-through hole for locking your rig with a cable lock, too.
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
The arch is arguably the most important engineering feat in human history. One look at Saris’ Bones 2-Bike rack would make any ancient Roman proud. With three incredibly strong, arched leg mounts and two arched arms, you can rest assured that your bike is in solid hands. Six highly adjustable straps, each equipped with soft coated hooks, hold the rack down, while the three legs have grippy rubber feet to provide a sturdy base. Ratcheting anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers.
Saris’ Bones 3-Bike rack unites utilitarian strength and modern style. Crafted of incredibly strong, injection-molded plastic, the four arched leg mounts and two arched arms cradle your bikes on different levels to minimize unwanted handlebar and seat contact. Six highly adjustable straps, each equipped with soft, vinyl-coated hooks, hold the rack down, while the four legs have grippy rubber feet to provide a sturdy base that won't harm your vehicle's finish. Ratcheting, soft-touch, anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers. Plus, it folds fast for easy portability and storage.
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.
If you have a full-suspension bike, a small bike or any bike without a traditional top tube, you need Evo's Top Tube Adapter to attach your bike to your rack. The vinyl-coated clamp protects your bike's finish, and is coated with a rust-free powder coat. It fits up to 44mm headsets and up to 38mm seat post diameters.
Securely transport up to two bikes with Swagman's Chinook. The platform style requires minimal lifting to load bikes and the adjustable, locking hooks secure your bike's frame to the rack. - Tilts down to allow access to rear-of-vehicle, even while bikes are loaded - Fits most frame sizes, shapes, and styles - Fits 1-1/4" and 2" hitch receiver - Adjustable locking hooks secure frame to rack - Locking hitch pin - Carries up to 2 bikes - Wheel ratchet straps firmly hold bikes and secure wheels - Fat tire trays sold separately - Max. load: 45 lbs. per bike
Whether it’s a city bike with a step-through frame or full-suspension mountain bike, some bikes just may not work well with a car rack that suspends the bike from its top-tube. Swagman's Deluxe Bar Adapter changes that. This telescopic bar hooks under the stem and around the seatpost to create a "top tube" that the rack can hold. It features vinyl-coated, quick release hooks so it's gentle on your bike and easy to use. The 19-inch Deluxe Bar expands up to 26-inches in length.
Meet the SUPERBones. It is the classic Bones 3-bike trunk rack, reimagined. Saris took everything they've experienced, observed and learned from their Bones customers and used it to guide their design process. Out of that work was born a trunk rack more secure, more beautiful and more intuitive. With interwoven steel straps that store neatly within the rack to the floating foot that pivots to conform to a wide variety of trunk shapes, the SUPERBones is truly a functional piece of art with all the features of a forward-thinking bike rack. - Carries 3 bikes (35 lbs/bike) - Anti-sway adjusts in and out to maximize bike protection - Bikes are easy to load thanks to pivoting anti-sway straps. - Integrated locking to secure bike to rack and rack to car - Heavy duty straps reinforced with internal steel strands - Strap adjustment lever quickly tightens rack to car - Internal ratcheting mechanism creates the best-in-class strap management - Adjustable foot for maximum protection of car by intuitively adjusting to vehicle’s trunk, bumper shape and design - Stationary outer leg creates an easy install on vehicle - Frame fits over most spoilers - Rust-free, injection molded plastic - Compatible with most vehicles (consult the Saris Fit Guide for approved fits) - Lightweight at 18.5 lbs
Page 1 of 1